Electrical / Lighting / Fittings 

Cable glands (brass/SS/PA, IP66/67, ATEX)

Junction boxes (marine grade, IP66/67)

Marine switches & sockets (CEE 32A/63A)

Reefer container plugs & outlets

Navigation/signal/flood/search LED lights (DNV/ABS approved)

Explosion-proof lights (ATEX/IECEx)

CCTV marine cameras (IP68)

Marine automation: PLC, I/O, power supplies, surge protection

Valves & Actuators

Butterfly valves (DN50–2000, PN10/16/25)

Ball valves (2-way/3-way, PN16–40)

Check valves (swing/dual plate)

Control valves

Strainers (Y-type / basket)

Marine certified (DNV/ABS/LR)

Manual / electric / pneumatic / Hydraulic actuators

Tube & Fittings

Tube fittings (SS316, 1/8"–2")
DIN bite-type fittings (6mm–42mm)
Needle / ball / check / relief valves
Manifold valves (2-way / 3-way / 5-way)
Block & bleed valves
UHP fittings (up to 20,000 psi)
Seamless instrumentation tubes (SS316, 1/8"–1" OD)

Ballast Water TRO Systems

TRO sensors & monitors (IMO/USCG compliant)

TRO sensor spare parts/fittings/optical sensor /TRO Main PCB

TRO Water part /Tubing / Flushing kit/reagent pump 

Calibration/reagent kits

Main Engine / Generator / Aux

Nozzle tips (atomizers): for 2‑stroke & 4‑stroke marine diesel engines
Plunger & barrel assemblies: compatible with MAN, WÄRTSILÄ, SULZER, SKL, YANMAR, DAIHATSU, AKASAKA, HANSHIN, MITSUBISHI engines
Delivery valves/valve supports: high-pressure diesel injection components
Spindle guide assemblies: conventional & slide type; used in engine models 26/35/42MC, 50/60/70MC, 80/90MC

Gauging & Alarm Systems

Tank level gauges (cargo/ballast/service tanks)

Cargo tank monitoring systems

Pneumatic ballast/draft gauges: 0–40 m, ±1 %, 8–10 mm pipe, air 4‑7 bar

Bilge alarms (15 ppm)

Gas detection systems

Radar level sensors: 0–40 m, ±2 mm, 4‑20 mA, Ex ia IIC T6
Oil content monitor (ODM‑2000): 0–1000 ppm, 4‑20 mA, IMO MEPC.108(49)
Pressure Transmitter: 0–16 bar, ±0.5 %, IP68, Ex ia IIC T6

Remote valve control systems

Adhesives & Chemicals

Epoxy repair compounds: machinable, max layer 10 mm, pot-life ~60 min

High-temp sealants: –35 °C to +200 °C (brief +280 °C)

MS-polymer adhesives/sealants: gap filling ≤1 mm, temp up to +200 °C

Silicone sealants: –50 °C to +280 °C, Shore-A ~30, elongation ~500 %

Anaerobic adhesives (threaded joints): gap ≤0.15 mm, up to M20 / R ¾